|
|
The MD800 is a cost effective frequency agile SAW filtered demodulator for adjacent channel operation from Master Video accepting broadcast or CATV channels from 50 to 800 MHz. The broadband RF television signals
are converted to baseband video and audio signals. True synchronous video detection and intercarrier SAW filter are employed.
Channel selection is done by convenient front panel button and last channel entry is stored in nonvolatile memory and restores the tuning status after a power failure.
Addressable RS232 control allows status read and channel set. This can be done remotely from anywhere with the optional RS232 module and an optional external modem. Multiple units can be daisy chained
This series is manufactured in NTSC and PAL standards.
|
| SPECIFICATIONS:
|
|
| TELEVISION STANDARDS:
|
NTSC [ PAL B, D, G, H, I, K, M and N available for Export ]
|
| INPUT FREQUENCY
|
50-800 MHz ALL VHF, UHF and CATV channels
|
| ADJACENT REJECTION
|
>60dB
|
| AGC RANGE
|
40 dB
|
| VIDEO S/N RATIO:
|
>55dB@10dB/mV
|
| VIDEO OUTPUT:
|
0.75 V to 1.25 V pp into 75 Ohms
|
| AUDIO OUTPUT:
|
0 dBm into 600 Ohms unbalanced
|
| CONNECTORS:
|
F and RCA, also available BNC and RCA
|
| POWER:
|
117 V AC (220-240 V) / 13 W
|
| ENCLOSURE:
|
1.75" x 19" rackmount
|
| [specs. subject to change]
|
|
 :
|
 MD800.pdf download (Acrobat File)
|
|
|
|
